Filter
Top Products
Page 15 of 40
SECONDARY MENU
Hold UP ARROW & ENTER. Press INDEX to advance to the next
menu item. Press UP ARROW or DOWN ARROW to change the
value in the display. Press ENTER to retain the value.
EditEdit
EditEdit
Edit Edit Set Point parameters: Select 0, 1, 2, or 3.
00
00
0 Edit function is off.
11
11
1 Edit Secondary and Secure Menus for Set Point 1.
22
22
2 Edit Secondary and Secure Menus for Set Point 2.
33
33
3 Edit Secondary and Secure Menus for both Set
Points in sequence (menu items for Set Point 1
followed by menu items for Set Point 2).
If
EditEdit
EditEdit
Edit is set to
00
00
0, begin.
If
EditEdit
EditEdit
Edit is set to
11
11
1 or
33
33
3, jump to
Out1Out1
Out1Out1
Out1 on page 17.
If
EditEdit
EditEdit
Edit is set to
22
22
2, jump to
Out2Out2
Out2Out2
Out2 on page 21.
PEA1PEA1
PEA1PEA1
PEA1 The Peak feature stores the highest input the control has
measured for Zone 1 since the last reset or Power On. At
Power On, PEA1 is reset to the present input value. To
manually reset the value
PEA1PEA1
PEA1PEA1
PEA1 must be in the lower display.
Press the ENTER key to reset.
PEA1PEA1
PEA1PEA1
PEA1 will be reset and
display the present input value.
UAL1UAL1
UAL1UAL1
UAL1 The Valley feature stores the lowest input the Instrument
has measured for Zone 1 since the last reset or Power On.
At Power On,
UAL1UAL1
UAL1UAL1
UAL1 is reset to the present input. To manually
reset the value
UAL1UAL1
UAL1UAL1
UAL1 must be in the lower display. Press
the ENTER key.
UAL1UAL1
UAL1UAL1
UAL1 will be reset and display the present
input value.
PEA2PEA2
PEA2PEA2
PEA2 The Peak feature stores the highest input the control has
measured for Zone 2 since the last reset or Power On. At
MENU SELECTIONS
PRIMARY MENU
Press INDEX to advance to the next menu item. Press UP ARROW or
DOWN ARROW to change the value in the display. Press ENTER to retain
the value.
SP1SP1
SP1SP1
SP1 Set Point 1 Adjust, Control Point 1.
SP2SP2
SP2SP2
SP2 Set Point 2 Adjust, Control Point 2.