Filter
Top Products
6. Once the display shows the TOTAL VOLUME setting you desire, press the
START/STOP key. As the fluid begins to dispense, the non-flashing display
shows the calculated volume of dispensed fluid, as it occurs in time.
In the TOTAL VOLUME Mode, the pump stops running after it dispenses
the TOTAL VOLUME requested.
To stop pumping before that time, press the START/STOP key. The pump
stops running, and the display returns to the STOPPED DISPLAY Mode.
When the pump stops, the display shows the calculated volume of fluid
dispensed.
Do not be alarmed if this number is slightly larger than the TOTAL VOLUME
you requested. Since the pump motor can not stop instantaneously, this
number includes any small amount of fluid that escapes while the pump is
in the process of stopping.
Table 6-4 shows how other keys and buttons can be used while pumping in the
TOTAL VOLUME mode.
Operating the Pump Motor in the RUNNING Display Mode
6
6-18
NOTE