Operating the Pump Motor in the STOPPED Display Mode
5
5-10
xxx mL/min
FLOW
RATE
ACTION
Displays current
FLOW RATE setting
Display shows
Using the UP ARROW key (
ᮡ
) will cause the FLOW RATE value to scroll up to
the maximum FLOW RATE determined by TUBE ID then scrolls over to the
minimum FLOW RATE.
Using the DOWN ARROW key (ᮢ) will cause the FLOW RATE value to scroll
down to the minimum FLOW RATE determined by TUBE ID then scrolls over
to the maximum FLOW RATE.
OR
xxx mL or xxx Liters
TOTAL
VOLUME
ACTION
Displays current
TOTAL VOLUME
setting
Display shows
Using the UP ARROW key (
ᮡ
) will cause the display to scroll up to a maximum of
10000 liters then over to 1 mL.
Using the DOWN ARROW key (ᮢ) will cause the display to scroll down to 1 mL
then roll over to 10000 liters.
OR
xx:xx:xx
TIME
ACTION
Displays current
TIME setting
Display shows
Using the UP ARROW key (
ᮡ
) will cause the flashing TIME setting to scroll up
to maximum then roll over to “0”. The maximum time is 12 hours, 59 minutes
and 59 seconds (12:59:59).
Using the DOWN ARROW key (ᮢ) will cause the flashing TIME setting to scroll
down to “0” then roll over to the maximum. The maximum time is 12 hours,
59 minutes and 59 seconds (12:59:59).
OR
The flashing group
(SECONDS, MINUTES, or
HOURS) is the one that will
scroll when the UP or
DOWN ARROW key is
pressed. Pressing the TIME
key again will select a
different group.
xxx rpm
RPM
ACTION
Displays current
RPM setting
Display shows
Using the UP ARROW key (
ᮡ
) will cause the RPM setting to scroll up to 600 rpm
then roll over to 10 rpm.
Using the DOWN ARROW key (ᮢ) will cause the RPM setting to scroll down to
10 rpm then roll over to 600 rpm.
OR