Filter
Top Products
For F60-Series/N60, F50-Series/N50 and F-401x/N5005 (in Aperture-
Priority Auto (A) or Manual (M) mode)
Note the aperture set on the lens and set the same aperture on the
SB-28’s LCD panel by pressing the { or } button. Then confirm the
flash shooting distance range.
With Nikkor lenses without a built-in CPU
(for F60-Series/N60, F50-Series/N50 and F-401x/N5005)
Select the aperture on the lens and set the same aperture on the
SB-28’s LCD panel by pressing the SB-28's { or } button, then
confirm the flash shooting distance range.
3
Wait for the ready-light to come on and make sure the subject is
in focus before taking the picture.
• If the ready-light blinks for approx. 3 seconds after shooting, this indicates the
light may have been insufficient for correct exposure. In this case, use a
wider aperture or move closer to the subject.
37