When the µ button on the back of the SB-28 is pressed, the flash
mode indicator sequences through these modes:
Note that the LCD indications and available flash modes differ depending
on which Nikon camera and lens you are using.
The table below shows the auto flash mode recommended for use with
each camera group.
—Refer to the reference pages corresponding to your camera.
• For available flash operations with the SB-28 and each camera group, refer to the
table on the fold-out page at the front of this manual.
22
t
tØ
tø
˙
Q
"
Selecting a flash mode
Camera group
I
II
III
IV
V
VI
VII
Recommended auto flash mode
Reference
page
Automatic Balanced Fill-Flash with TTL Multi Sensor
tØ
Matrix Balanced Fill-Flash tø
Matrix Balanced Fill-Flash t
Matrix Balanced Fill-Flash t
Programmed TTL Auto Flash t
Standard TTL Flash t
Non-TTL Auto Flash ˙
26–30
31–32
33–34
35–37
38–39
40–41
42–43