90xx-Utilities
902x-Copy
9021-Station Copy
922 ◆ Maintenance Options: 9001-9211 DSX Software Manual
Using 9021-01: Station Copy
To copy data from an extension to another extension or range of extensions:
1.
Access option 9021-01. You see: Copy Program
2.
Press HOLD and select the option (01-23) corresponding to the station program you want to copy.
• You can dial the option number (01-23) or press
Volume
Up
and
Volume Down
to scroll through the selections.
3.
Press HOLD. You see: From Extension
4.
Enter the source extension number + HOLD. You see: To Extension
• This is the extension from which the data will be copied.
5.
Enter the target extension number + HOLD. You see: Thru Extension
• This is the extension to which the data will be copied.
• If you are copying data to a range of extensions, this is the first (lowest) extension in the range.
6.
Do one of the following.
a.
If copying data to a single extension, re-enter the extension you entered in step 5 above + HOLD.
b.
If copying data to a range of extensions, enter the highest (last) extension in the range + HOLD.
7.
When the copy has successfully completed, you see: Copy Complete