Headset Compatibility
DSX Software Manual Features ◆ 201
Features
Operation
User Programmable Feature
Using the Headset
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To connect the headset:
1.
Plug a compatible headset into the telephone headset jack.
To turn the headset mode on and off:
1.
Do one of the following.
a.
Press the headset Feature Key on your telephone or DSS Console.
b.
Use the User Programmable Features (see below).
While in the headset mode:
1.
You can do the following.
a.
Press a line key to place or answer an outside call.
b.
Press INTERCOM to get Intercom dial tone.
c.
If on a call, press SPEAKER to hang up.
Turning the Headset Mode On and Off
Feature Mnemonic Operation Access Level
Headset Compatibility
#HS (#47)
#HS
+ Y to enable or N to disable + SPEAKER to exit. 3-5