Filter
Top Products
31
W415-0153 / B / 06.10.10
5.5 LOGO PLACEMENT
Remove the backing of the logo supplied and centre over the logo installation holes, as indicated.
5.3 GLOWING EMBERS
5.4 CHARCOAL EMBERS
32.1
Randomly place the charcoal embers along the
f
ront and sides o
f
the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
31.1
Tear the glowing embers into pieces and place onto the screen beneath the front log. Care should be taken to
shred the embers into thin, small irregular pieces as only the exposed edges of the fi bre hairs will glow when
exposed to direct fl ame.
!
WARNING
DO NOT BLOCK THE BURNER PORTS. BLOCKED PORTS CAN CAUSE AN INCORRECT FLAME
PATTERN, CARBON DEPOSITS AND DELAYED IGNITION.