Filter
Top Products
2
W415-0153 / B / 06.10.10
NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.
TABLE OF CONTENTS
1.0 INSTALLATION OVERVIEW 3
2.0 INTRODUCTION 4
2.1 DIMENSIONS 5
2.2 GENERAL INSTRUCTIONS 5
2.3 GENERAL INFORMATION 7
2.4 RATING PLATE INFORMATION 8
3.0 VENTING 9
3.1 VENTING LENGTHS AND COMPONENTS 10
3.2 TYPICAL VENT INSTALLATION 11
3.3 SPECIAL VENT INSTALLATIONS 12
3.3.1 PERISCOPE TERMINATION 12
3.4 VENT TERMINAL CLEARANCES 13
3.5 VENTING APPLICATION FLOW CHART 14
3.6 DEFINITIONS 14
3.7 ELBOW VENT LENGTH VALUES 14
3.8 TOP EXIT HORIZONTAL TERMINATION 15
3.9 TOP EXIT VERTICAL TERMINATION 17
3.10 VERTICAL THROUGH EXISTING CHIMNEY 19
4.0 INSTALLATION 20
4.1 MINIMUM CLEARANCES TO COMBUSTIBLES 20
4.2 WALL AND CEILING PROTECTION 21
4.2.1 HORIZONTAL INSTALLATION 21
4.2.2 VERTICAL INSTALLATION 22
4.2.3 HORIZONTAL AIR TERMINAL INSTALLATION - MODEL GDS28 22
4.2.4 VERTICAL AIR TERMINAL INSTALLATION 23
4.3 APPLIANCE VENT CONNECTION 24
4.4 MOBILE HOME INSTALLATION - MODEL GDS28 24
4.5 GAS INSTALLATION 25
4.6 OPTIONAL WALL SWITCH / THERMOSTAT / REMOTE 25
4.7 B-VENT SPECIFICS 26
4.7.1 CHIMNEY INSTALLATION 26
4.7.2 INSTALLING "B" VENT 27
4.7.3 B-VENT 27
4.7.4 COMBUSTION AIR 28
4.7.5 ADDING VENT SECTIONS 28
5.0 FINISHING 29
5.1 DOOR CLOSING AND OPENING 29
5.2 LOG PLACEMENT 30
5.3 GLOWING EMBERS 31
5.4 CHARCOAL EMBERS 31
5.5 LOGO PLACEMENT 31
6.0 OPERATION 32
6.1 OPERATING/LIGHTING INSTRUCTIONS 33
7.0 ADJUSTMENT 34
7.1 PILOT BURNER ADJUSTMENT 34
7.2 VENTURI ADJUSTMENT 34
7.3 FLAME CHARACTERISTICS 35
7.4 RESTRICTING VERTICAL VENTS - MODEL GDS28 35
8.0 MAINTENANCE 36
8.1 CARE OF GLASS 36
8.2 BLOWER REPLACEMENT 37
9.0 REPLACEMENTS 38
10.0 TROUBLE SHOOTING 42
11.0 WARRANTY 45
12.0 SERVICE HISTORY 46