Filter
Top Products
29
W415-0153 / B / 06.10.10
5.0 FINISHING
5.1 DOOR CLOSING AND OPENING
!
WARNING
RISK OF FIRE!
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
REMOVED, CRACKED, BROKEN OR SCRATCHED.
72.4
!
WARNING
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
75.3
When installing the fi re viewing door, a simple procedure must be followed in order to not damage the door.
5.1.1 Open both side doors, exposing the bushings on the left and the latches on the right.
5.1.2 Align the pins on the door to the bushings. Lower into place until both bushings touch.
5.1.3 Engage the latch hooks into the door frame. Snap the rear handle hook to lock the latch closed.
NOTE: It may be necessary to lift the door when securing it to ensure that it is in a horizontal position.
To open the door, repeat in reverse order.
HINGE PIN
BUSHING
CATCH SLOT
DOOR
LATCH