Filter
Top Products
19
W415-0547 / B / 05.08.06
FINISHING
GLASS DOOR INSTALLATION
AND REMOVAL
CAST FRONT INSTALLATION
AND REMOVAL
FRONT
SCREWS
BRACKET
3
2
Follow the above steps in reverse in order to reinstall
the door. Ensure that the bottom of the door meets the
door retainer before closing the latches.
Follow the above steps in reverse in order to reinstall
the cast front. Ensure that the tabs on the underside of
the front fi t behind the front legs.
Note: It is not necessary to remove the cast front, in order
to remove the door.
DOOR
RETAINER
FRONT
LEGS
TAB
FRONT
FIGURE 31
LATCHES
DOOR
3
2
FIGURE 30
FIGURE 32
SWITCH FUNCTIONS
MAIN
BURNER
SWITCH
ACCENT
LIGHT
SWITCH
FAN
CONTROL
1. Lift the top cast piece off of the unit.
2. Unlatch the door latches from the door.
3. Slide the door straight up to remove.
1. Lift the top cast piece off of the unit.
2. Detach the front cast piece from the side pieces by re-
moving the screws from the brackets located in the upper
inside corners.
3. Slide the front straight up to remove.