Filter
Top Products
6
ARMING AWAY: SETTING THE ALARM WHEN LEAVING
Arming the System
1. Check the keypad. The green STATUS light must be on in order to arm.
If the green light is off, the number(s) of any unsecured zone(s) will display in the
window. Refer to the pull-up zone list for the location of each problem zone and
secure by closing windows, doors, etc.. When all zones are secure, the green
STATUS light will come on.
2. Arm the system. Enter your User Code followed by Q. The green STATUS
light will go off, the red ARMED light will come on. Note: If you enter an invalid
code, the keypad will beep 4 times, indicating an error. Re-enter your code.
3. Leave the premises. Leave through the exit door before the exit time expires.
Priority Arming
If you attempt to arm the system with a faulted Zone, a 3-second tone will sound at the
keypad and “P” will display in the window, indicating that the zones must be secured
before the panel can be armed.
Selectively Bypassing Zones
If you cannot locate or repair a faulted zone, it can be removed from the system, or
bypassed. Bypass the zone(s) from the system by pressing B, followed by the
zone number (or vice versa). The BYPASS icon will turn on to indicate that the zone
has been bypassed. Note: Bypassed zones are unprotected. If a faulted zone
cannot be secured, have the system checked as soon as possible. In addition, some
systems require a User Code to be entered prior to pressing B (for higher secu-
rity). Please consult with your alarm professional to see if this option is programmed
(GEM-P9600/GEM-P3200).
CHIME
12
CHIME
P
CHIME
BYPASS