Filter
Top Products
grid of cable trench every 23.62”(60 CM) on center. (Drawing D609)
Accessible Cable Trench - Clearance: 2.24”(57 mm)
Width: 3.54”(90 mm)
To assemble a module of 23.63” X 23.63”(60 cm X 60 cm) coverage requires:
1 UniPanel + 1 Central Cap + 1 Base Connector + 4 Flank Caps
D609
D610
f.
UniPanel: The main component of AD-
600 system is the UniPanel, which is a
composite panel of structurally
independent Sub-Panels. The 20.06” X
20.06”(510mm x 510mm) UniPanel
consists of 16 SubPanels each standing
on 4 integral pedestals. The SubPanels
are pre-connected by a .08”(2mm)
uniform joint line on all sides to form the
16-square UniPanels. This feature
provides maximum built-in flexibility for
the panels to easily accommodate either
any variance there might be in sub-floor
elevation--as the joints are not rigid. Or,
when encountering other architectural
elements such as walls and doorways, the
Panels can “break off” any of the
SubPanels to conform to floor area
constraints. (Drawing D610)
g.
Central Cap and Flank Cap: Central Caps are to be installed at the intersection of Cable Trenches,
and Flank Caps alongside UniPanels over the Cable Trenches. There is no need of tools of any kind.
The trenches remain fully accessible--Caps can be simply lift up by hand, and re-place after cable
4