Filter
Top Products
Installation Guide
AD-600
General Information
The main panels of the AD-600 are made of polypropylene and are 2.36”(6 CM) in height. Cable trench
caps are made of steel. Quick and easy installation is a strong advantage of the ConnectFloor systems.
AD-600 compromises one of the most unique, cost effective, and easily installed low-profile floors on
the market. No special tools are required. Professional quality installation can be achieved by flooring
installers such as those for carpet tiles and PVC tiles; or carpenters, handymen, and even amateurs.
Installation Time
The following estimates do not include material preparation and handling time.
For open space:
Trained installer: 900-1200 sq. feet (80-110 sq. meters) per man-day.
Newly trained or amateur: 600-800 sq. feet (55 – 75 sq. meters) per man-day.
Small rooms and irregular floor plans: may call for 20 to 30 percent more installation time. Good
preparation and job site planning are very influential to installation costs.
Recommended Tools Application
Electric Drill & Driver Perimeter & wall finish
Chalk line Marking straight line for large rooms
Pencils General Markings
Steel rule Measuring
Cutting Knife Cut UniPanel into Sub-Panels
Scroll saw Cut Wall Rail, Edge Rail at corners
Tape measures Measuring
1. Before installation
The following Instructions should be read before installation:
a. ConnectFloor systems are for in-door use only.
b. Modular carpet is the standard finish flooring for the AD-600 (3’X3’ carpet tiles are recommended).
c. Condition: UniPanel (AD-611) and adhesive should be conditioned at room temperature, not lower
than 40°F(5°C).
d. Floor Preparation: Sub-Floor must be free of grease, oil, wax, and moisture or any other foreign
material. All holes, cracks, and depressions should be filled with floor patching compound.
e. Sub-floor of the job site should be generally level. Elevation variation shall be no more than 3/8”(1
CM) within 3.3 feet (1 meter).
1