Filter
Top Products
Cleaning the turbo nozzle
(certain models only)
The turbo nozzle
ˆ
can be attached to either
the handle ⁄ or the extension tube · as
described in ‘Using the attachments in Lift
Away canister mode’.
Following use, your turbo nozzle may become
clogged.
1 Press the On/Off 3-position switch ‰ to the
“O” position to turn the vacuum off and unplug
the power cord from the mains outlet.
2 Remove the turbo nozzle from the extension
tube · or handle ⁄.
3 Slide the locking latch forward on the turbo
nozzle and gently tilt the housing upward to
open V.
IMPORTANT: DO NOT force; it will not open
all the way.
4 Carefully remove any blockage or debris.
5 Turn the turbo nozzle over to inspect the
rotating brush bar and pull away any hairs or
fibres. If they are tightly wound around the
brush, carefully snip the fibres with scissors
W, being careful not to damage the rotating
brush bar, pull away from the rotating brush
bar and dispose.
6 Push the housing back down and slide the
locking latch backward to lock.
STORAGE
1 Convert your vacuum back to upright vacuum
mode.
2 Rotate the upper cord wrap fl to its upright
position and coil the power cord loosely
around the upper fl and lower
Í
cord wraps
X.
3 Store the dusting brush
ı
and the crevice
tool
Û
/
Ù
on the mounts on the accessory
holder fi.
HELPLINE
If you have any difficulty with your appliance,
do not hesitate to call us.
We are more likely to be able to help than
the store from where you bought it.
Please have the following information ready to
enable our staff to deal with your query quickly.
• Name of the product
• Model number as shown on the rear of the
appliance.
• Serial number as shown on the rating label.
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us through our website,
or visit the site to browse and purchase
appliances, spare parts and accessories from
the extensive Morphy Richards range.
10
UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119
Upper
Cord
Wrap
Lower
Cord
Wrap
X
V
Rotating
Brush
W
VC73410MUK Rev2_Instruction Booklet 11/03/2011 11:00 Page 10