Filter
Top Products
26 86D0024
Place ickering bright embers (FBE-1G) after placing logs on burner. Pull apart into small
strands and place on top of existing rock wool in front of and between front logs where they
can be seen. Try to avoid stacking these embers on top of each other. Use smaller, stringier
strands for maximum effect. Use as much as needed until desired effect is achieved.
LG557
MJ27 flickering embers
10/08
Flickering
Ember Area
Figure 28 - Place Flickering Bright Embers
8. Place log #7 between the second and
third right tong on the grate as shown
in Figure 27.
LG549
MLDV log #7
Log #7
Figure 27 -
Place Log #7
LG549
LG556