86D0024 23
Before installing logs, place rock-
wool in dime size pieces evenly
over small burner ports starting
in front of the rear deector shield
towards the front. Avoid placing
rock wool over the slots on rear
and right side of burner and on
large yellow ame ports on front
of burner.
Wash hands after placing rock
wool. Itching may occur.
Before you begin — This unit is supplied with seven (7) ceramic ber logs. Do not handle these logs with your
bare hands. After handling the logs, wash
your hands gently with soap and water to remove any traces of bers.
WARNING
Never add additional logs or embellishments such as pine cones, vermiculite or rock wool to
Dime-Sized
Pieces of Rock
Wool
FP2011
place rock wool
FP2011
Figure 18 - Place Rock Wool
LG552
ember placement
10/08
Figure 19 - Correct Rock Wool Placement
LG552
WARNING
• Use only rock wool
• Do not add additional