Mitsubishi Electronics PKH36FL Air Conditioner User Manual


 
29
<DRY operation time chart>
Minimum 3 minutes w1
ON
Thermostat
Indoor fan
Auto vane
Booster heater
Compressor
ON
DRY MODE
DRY MODE
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
Operation starts by
POWER button
ON.
Operation stops by
POWER button
OFF.
Room temperature
becomes equal to
set temperature.
Room temperature
rises above set
temperature.
w1 Even if the room temperature rises above the set temperature during this period, the compressor will not start until this
period has ended.
2-2 DRY operation
<How to operate>
1 Press POWER ON/OFF button.
2 Press the MODE button to display “DRY”
3 Press the TEMP( or ) button to set the desired temperature.
NOTE: The set temperature changes 2°F when the TEMP( or )
button is pressed one time.
Dry 65 to 87°F
ON/OFF TEMP
FAN
VANE
TEST RUN
AUTO STOP
AUTO START
h
min
LOUVER
MODE
CHECK
RESETSET CLOCK
FAN
˚F
DRY
AM
OC276-A-1.qxp 03.11.25 9:05 AM Page 29