Filter
Top Products
25
2. INDOOR UNIT CONTROL
2-1 COOL operation
<How to operate>
1 Press POWER ON/OFF button.
2 Press the MODE button to display COOL.
3 Press the TEMP( or ) button to set the desired temperature.
NOTE:
Set temperature changes 2°F when the TEMP( or )
button is pressed one time.
Cooling 65 to 87°F.
Minimum 3 minutes w1
ON
Thermostat
Indoor fan
Auto vane
Booster heater
Compressor
ON
LOW or HIGH LOW or HIGH
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
Operation starts by
POWER button
ON.
Operation stops by
POWER button
OFF.
Room temperature
becomes equal to
set temperature.
Room temperature
rises above set
temperature.
<COOL operation time chart>
w1 Even if the room temperature rise above the set temperature during this period, the compressor will not start until this peri-
od has ended.
ON/OFF TEMP
FAN
VANE
TEST RUN
AUTO STOP
AUTO START
h
min
LOUVER
MODE
CHECK
RESETSET CLOCK
FAN
˚F
COOL
AM
OC276-A-1.qxp 03.11.25 9:05 AM Page 25