Filter
Top Products
– 6 –
3 Screen Configuration
<Screen Types>
● Function Selection of remote controller:
Set the functions and ranges available to the remote
controller (timer functions, operating restrictions, etc.)
● Set Day/Time: Set the current day of the week or time.
● Standard Control Screens: View and set the air conditioning system’s operating status
● Timer Monitor: View the currently set timer (weekly timer, simple timer,
or Auto Off timer)
● Timer Setup: Set the operation of any of the timers (weekly timer,
simple timer, or Auto Off timer).
˚F˚C
TIMER
MON
OFF
WEEKLY
SUN MON TUE WEDTHU FRI SAT
WEEKLY
˚F˚C
˚C
TIME SUN
Function Selection of remote controller
Set Day/Time
Standard Control Screens
OFF ON
Timer Monitor Timer Setup
ADC
BC
B
<How to change the screen>
A : Hold down both the Mode button and the Timer On/Off button for 2 seconds.
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons ( or ).
4
Setting the Day of the Week and Time
■ Use this screen to change the current day of the week and time setting.
Note:
The day and time will not appear if clock use has been disabled at Function Selection
of remote controller.
Day of the Week &
Time display
˚C
˚C
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
2
4
9
1
A
<How to Set the Day of the Week and Time...>
Time Setting
TIME SUN
2
3
4
1. Press the or Set Time button A to show display 2.
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun → Mon → ... → Fri → Sat.
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in minute intervals,
then in ten-minute intervals, and then in one-hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4
to lock in the values.
Day of the Week Setting