Filter
Top Products
– 19 –
<Flashing Error Codes>
On CITY MULTI Models On Mr. Slim Models
ON/OFF
ERROR CODE
ON/OFF
ERROR CODE
ON lamp
(Flashing)
Error Code
Indoor Unit No.
● If the ON lamp and error code are both flashing: This means that the air conditioner is out of order and operation has been stopped (and cannot resume). Take note of the indicated
unit number and error code, then switch off the power to the air conditioner and call your dealer or servicer.
If you have entered contact number to be called in the event of a problem, the screen displays this number.
(You can set this up under Function Selection of remote controller. For information, refer to section 6.)
Indoor Unit’s Refrig-
erant Address
Error Code
Indoor Unit No.
Alternating Display
ON lamp
(Flashing)
On CITY MULTI Models On Mr. Slim Models When the Check button is pressed:
● If only the error code is flashing (while the ON lamp remains lit): Operation is continuing, but there may be a problem with the system. In this case, you should note down the
error code and then call your dealer or servicer for advice.
* If you have entered contact number to be called in the event of a problem, push the Check button to display it on the screen. (You can set this up under Function Selection of
remote controller. For information, refer to section 6.)
ON/OFF
˚C
˚C
ERROR CODE
ON/OFF
˚C
˚C
ERROR CODE
ON/OFF
CALL:XXXX
XXX:XXX
Error Code
Error Code