Filter
Top Products
9
8.
Table of Functions Activated from the ME Remote Controller/System Controller
Functions operated from the wireless remote controller that came with M/P/S series.
[Symbol] : Available/ : Available with limitations on the display/×: Non-available/–: Non-applicable (no functions)
*1: Functions that are not available on M/P/S series (MAC-399IF) cannot be performed.
The display on the M-NET side in shown in ( ).
*2: The display does not appear on the wireless remote controller.
ME remote
controller
(High)
(High)
(Bottom flow
Position3)
×
Power On (Operation)
Power Off (Stop)
Auto operation (Operation)
Manual Cool (Cool)
Manual Heat (Heat)
Manual Dry (Dry)
Air-purifying (Fan)
Low (First: Low)
Med. (Second: Medium2)
Med. (Third: Medium2)
High (Third: Medium1)
High (Forth: High)
Super high (Forth: High)
AUTO
Low (First: Low)
Med. (Second: Medium)
Med. (Second: Medium1)
High (Third: Medium)
Med. (Second: Medium2)
Super high (Forth: High)
AUTO
Position1 (Horizontal)
Position2 (Bottom flow Position2)
Position3 (Bottom flow Position3)
Position4 (Vertical)
Position5 (Vertical)
Swing
AUTO
16°C–31°C
Timer display
Inlet temp. (10–38°C) *2
9. Specifications
Input voltage
Power consumption
Input current
Input voltage
Air conditioner side
M-NET side
12 V
0.6 W
0.05 A
17–24 V
Functions *1
On/Off
Mode
Fan speed
(MSZ, S, P)
Fan speed
(MFZ)
Air direction
Set
temperature
Monitor
G-50A
(High)
(High)
(Bottom flow
Position3)
×
BACnetl/F
(High)
(High)
(Bottom flow
Position3)
×
LM-AP
(High)
(High)
—
—
—
—
—
—
—
×