Filter
Top Products
4
3. Mounting the M-NET Interface Unit
The M-NET Interface unit should be placed in a location where the 5-core connecting cable from the interface can reach an indoor
unit. Do not extend the 5-core connecting cable. This will cause the device to malfunction.
Mount the interface unit securely to a pillar or wall using 2 or more screws.
Mounting screws 3
■ When Using Wall Mounting Brackets 2
1
Attach the wall mounting brackets 2 to the interface unit
1 using 2 mounting screws 3.
Mounting screws C
Interface unit 1
Wall mounting
brackets 2
Mounting
screws 3
Cord clamp for
wiring B
■ When Mounting Directly to a Wall
Mount the interface unit 1 case to the wall using the mounting
screws 3.
* When mounting the interface unit 1 using a cushioning
material 4, be sure to mount it in a location where it will not
fall.
Interface case
mounting screws D
Mounting
screws 3
Cushioning material 4
Interface unit 1
2
Mount the unit to a pillar or wall using 2 mounting screws 3.
When mounting the interface unit 1 inside a ceiling
or wall, install an access door to facilitate mainte-
nance.
When the interface unit 1 is mounted
above an indoor unit, it should be
positioned 40 mm or more away from the
unit to ensure that ceiling grills can be
removed.
40 mm or more
Attach the 5-core connecting cable of the interface unit
1 here. Store extra 5-core connecting cable in the
ductwork space behind the indoor unit.
* If there is any slack in the 5-core connecting cable,
use a fastener A to keep it in place.