Filter
Top Products
Changing the jets
Disconnect the gas hob from the
mains electricity supply. Turn off the
gas supply.
To change the main jets
^ Remove the pan support, burner cap
n and burner head o.
^
Using an M7 socket spanner,
unscrew main jet s.
^
Change the main jet.
To change the small jets
The upper section of the appliance has
to be removed before the small jets can
be changed.
^
Remove burner cap n and burner
head o.
^
Pull the control knobs off.
^
Loosen screws t.
^
Carefully remove the upper section of
the appliance. When doing this make
sure you do not also pull out the light
unit for the display a located
underneath the upper section. To
release the unit, squeeze together
the two clamps b.
^
Using a small screwdriver, unscrew
small jet u in the gas fitting.
^
Pull out the jet with a pair of pliers.
^
Fit the correct jets securely (see jet
table).
^
Finally, secure the jets against
inadvertent loosening with sealing
wax.
Conversion to another type of gas
53