Filter
Top Products
Rapid ignition system
The appliance is supplied with a rapid
ignition system with the following
features:
–
Rapid ignition without pressing und
holding the control
–
Automatic re-ignition
Should the flame be extinguished by
a gust of air, the burner will re-ignite
automatically.
If re-ignition is unsuccessful, the gas
supply will be cut off automatically
(see "Safety cut-off").
Switching on, adjusting the
flame and switching off
The control is used to ignite the burner
and to regulate the strength of the
flame.
ß The gas supply is turned off
& Strong flame
/ Weak flame
The burners can only be switched
on by pressing in the appropriate
control and turning it anti-clockwise,
and switched off by turning the
control clockwise.
The following will cause damage to
the appliance:
- Switching the burner on without
pressing the control down,
- Switching the burner on by
turning the control clockwise,
- Switching the burner off by
turning the control
anti-clockwise.
The manufacturer will not accept
liability for any damage resulting
from incorrect operation.
Operation
22