Meyer 4218 Vacuum Cleaner User Manual


 
END OF CROP CLEANUP AND MAINTE
-
NANCE
Allow box to completely clean out last load of forage.
Clean out all forage material from inside the box, roof
and on the outside of the box. Clean the front cross con
-
veyor on the top pan and in the lower pan (chain return)
area. Clean out the clean-out panel. Clean out the de
-
flector shield at the rear of the box, both inside and out
-
side.
It is recommended to lube the forage box before storage
to exclude moisture from bearings. Apply oil to roller
chain drives and to the main apron chains and cross con
-
veyor chains. Also, new or used oil is recommended to
be applied to the floor and inside of the box walls.
It is also agood time to inspect all adjustmentsand check
for parts that need repair or replacement. Performing
these tasks now will guarantee that the forage box is
ready for use at the beginning of the next season.
3200 & 4200 Series -- 21 –
LUBRICATION DIAGRAMS (Shields Removed for Illustration Purposes Only)
BOTH SIDES