Filter
Top Products
Mercur
y
6-5 Stat
–
Installation & User Guide
Setting up the controller
Access to the controller can be achieved several ways
• Through the front mounted buttons
• Direct access by PC or palm top into the rear comms port. This requires a software package available
on the RDM website
• Through the RDM Data Director or Data Manager.
Set-up Mode
Set-up through front buttons
Ensure that all power is
ENTER UP
DOWN
To enter set-up mode, hold the Enter and Down buttons together for approximately 3 seconds until the
message “Ent” appears on the display. Now press the Enter button again to enter the function menu. IO will
be displayed. Scroll up or down to go through the list.
Set-up Function Menu
Display Option Explained in Paragraph
IO
View Input/Output States
View Input/Output States
PArA
Set/view Parameters
Set/view parameters
Unit
Set Probe type and units (
o
C or
o
F) Set/view units
TyPE
Set/View Controller Type
Set/view product type
rtc
Set/view Clock (rtc = Real Time Clock)
Real Time Clock
nEt
Set/view network configuration
Network Configuration
SoFt
View software version
OFSt
Probe offset
Probe Offset
ESC
Escape back to normal operation
switched off before
installing or maintaining
this product
Revision 1.2 Page 5 of 21