Filter
Top Products
3. The third option, “S/PDIF In,” connects ports OUT1 and OUT2 directly to the
hardware S/PDIF input on the Delta 66 PCI host card. The left channel of the
S/PDIF In is routed to OUT1 and the right channel of the S/PDIF In is routed to
OUT2.
4. The fourth option, “S/PDIF In (L/R Rev.),” functions identically to the third
option, except that the left and right channels are swapped. Therefore in this
mode, the left channel of the S/PDIF In is routed to OUT2 and the right channel
of the S/PDIF In is routed to OUT1. Note that this option is solely for
monitoring/mixing purposes — the S/PDIF In will not record in reverse when
this option is checked.
5. Selections five and six connect the hardware analog inputs 1 & 2 or 3 & 4
(respectively) directly to the Delta 66’s hardware analog outputs 1 & 2. For
example, if “H/W In 1/2” were selected, any signal present at the IN1 port will
be copied to OUT1, and any signal present at the IN2 port will be copied to
OUT2. This same behavior applies to “H/W In 3/4” when selected.
The next vertical column of the Patchbay/Router page “H/W Out 3/4,” connect this
hardware analog stereo pair to one of five stereo sources.
1. The default setting, “WavOut 3/4”, connects ports OUT3 and OUT4 to your
music software or Windows multimedia applet. In other words, when music
software plays audio to the device named “WavOut 3/4 Delta-66” it will be
routed directly to the “hardware” analog outputs 3 & 4 of your Delta 66’s break-
out box.
2. The second option, “S/PDIF In”, connects ports OUT3 and OUT4 directly to the
hardware S/PDIF input on the Delta 66 PCI host card. The left channel of the
S/PDIF In is routed to OUT3 and the right channel of the S/PDIF In is routed to
OUT4.
3. The third option, “S/PDIF In (L/R Rev.)”, functions identically to the second
option, except that the left and right channels are swapped. Therefore in this
mode, the left channel of the S/PDIF In is routed to OUT4 and the right channel
of the S/PDIF In is routed to OUT3.
4. Options four and five connect the hardware analog inputs 1 & 2 or 3 & 4
(respectively) directly to the Delta 66’s hardware analog outputs 3 & 4. For
example, if “H/W In 1/2” were selected, any signal present at the IN1 port will
be copied to OUT3, and any signal present at the IN2 port will be copied to
OUT4. This same behavior applies to “H/W In 3/4” when selected.
The rightmost vertical column of Patchbay/Router page, “H/W Out S/PDIF,”
connects the Delta 66’s hardware S/PDIF output to one of six stereo sources:
1. The default setting, “WavOut S/PDIF,” connects the S/PDIF Out port to
your music software or Windows multimedia applet. In other words, when
music software plays audio to the device named “WavOut S/PDIF Delta-
66” it will be routed directly to the hardware S/PDIF output on your Delta
66’s PCI host card.
19