Filter
Top Products
drivers for input and output will be “Sound Manager” both for input source and for
output port.
To select the Sound Manager driver, open the Apple Menu and go to Control Panel
| Sound. For both “Sound In”and “Sound Out,” click and highlight the Delta icon,
then exit. You may select which Delta hardware stereo input pair and stereo output
pair will be used for the Sound Manager’s Sound In and Sound Out in the Delta
Control Panel “Hardware Settings Page” (see section, “Hardware Settings
Page”under “Delta Control Panel”). Whichever stereo pair you select, the software
input and output device selection within your music program will remain the same.
ASIO DRIVER INPUT DEVICES: When using the ASIO audio drivers with
programs that support ASIO-style audio, the input devices are displayed as mono
devices. Within ASIO software applications, the names of the Delta 66 audio input
devices are:
Analog In1 Delta-66
Analog In2 Delta-66
Analog In3 Delta-66
Analog In4 Delta-66
S/PDIF In L Delta-66
S/PDIF In R Delta-66
Mon.Mixer L Delta-66
Mon.Mixer R Delta-66
Notice the S/PDIF In and Monitor Mixer names include “L” and “R” characters.
“L” indicates the left channel of the stereo stream, while “R” indicates right channel.
ASIO DRIVER OUTPUT DEVICES: The Delta 66’s ASIO output devices appear in
stereo pairs. Because each device is stereo, you may see “left” and “right”
references within your software application. This allows the application to pan
audio left and right under software control. To send a signal to a Delta ASIO output
1 (for example) as a mono output send, one would choose “Analog 1/2 Delta-66” for
that track’s output port, and then pan that output hard left. The ASIO outputs are
named as follows:
Analog 1/2 Delta-66
Analog 3/4 Delta-66
S/PDIF L/R Delta-66
WINDOWS MULTIMEDIA SETTINGS: Windows may be set up to use the
Delta 66 as its default audio device, allowing system sounds to be sent out the Delta
66. This also enables you to use the Delta 66 with the sound applets included with
Windows. To set this up, go to Control Panel | Multimedia. In the Audio Properties
page, set the Playback and Recording devices to the Delta 66 input and output
devices of your choice.
14