Filter
Top Products
Delta 66 Control Panel Software
ON THE PC: Once the Delta 66 is properly installed, an "M Audio Delta H/W" icon
will be displayed in your Windows Control Panel. By double-clicking on that icon,
you will launch the Delta Control Panel software. You may also launch the Delta
Control Panel software from the desktop if you have previously created a shortcut
there (see "Verifying Delta Control Panel Software Installation" section for
instructions on how to do this). Once the Delta Control Panel software has been
opened, you will see the main panel and its several tabs. To display a desired page,
click on its tab. Below are functional descriptions of each page.
ON THE MAC: The Delta Control Panel must be placed on the hard drive by
dragging the application from the Drivers CD. Once this is done, a alias may be
created by highlighting the Delta Control Panel on the hard drive and pressing the
Apple key+M. Then, this alias may be dragged to the desktop. Double clicking
either will launch the control panel. Once the Delta Control Panel software has been
opened, you will see the main panel and its several tabs. To display a desired page,
click on its tab. Below are functional descriptions of each page. Though most of the
desciptions are Windows based, the functions are identical unless otherwise
indicated. Within each section you will find the necessary name changes for using
the Delta Control Panel “ON THE MAC.”
NOTE: When using a music software program that is ASIO
capable, launch the Delta Control Panel software from within
that program. There will be a button in the ASIO or Audio setup
page that will allow you to do so. Some of the control panel
functions will be controlled from within that program, such as
master clock setting and sample rate, so it is desireable to
launch the music program first, and then the Delta Control
Panel from the the program’s “launch” or “control panel”
button. Without the music program open however, it is okay to
open the Delta panel from your desktop or other location.
Monitor Mixer Page
The Monitor Mixer is the first page that appears when the Delta Control Panel is
opened, and controls the digital mixer built into the Delta 66’s PCI controller chip.
As described in previous sections, the output of this mixer may be assigned to the
OUT1/OUT2 analog outputs and/or the S/PDIF Out digital output. At the same
time, the mixer outputs may be recorded in stereo by software.
15