Filter
Top Products
8 Installation (For Qualified Installers Only)
Travis Industries 4061016 100-01184
Clearances - Straight Installation
7” Minimum
6” Minimum
3”
Minimum
2”
Minimum
“Tee”
3” Minimum
7” Minimum
Through the Wall Installations
Interior Vertical Vents
Floor Protection
6” Minimum
Clearances - Corner Installation
Through the Wall Vents
6” Minimum
3” Minimum
45° Elbow
45°
3” Minimum
Interior Vertical Vents
3” Minimum
3” Minimum
6” Minimum
2”
Minimum
3”
Minimum
“Tee”
Note: If interior vertical pellet vent is used, the clearance to the backwall is determined by the
upward-turning elbow or "Tee". It will vary in depth depending on the brand of pellet vent
used (it is approximately 5"). Before placing the heater, connect the elbow or "Tee" and
measure off the 3" clearance.