Lodge Manufacturing GMD1-80N Furnace User Manual


 
All installations and services must be performed by qualified service personnel.
41
IX. USER INFORMATION SECTION
A. WARNINGS AND CAUTIONS:
: If you suspect there is a problem with the furnace, pertaining to the
venting system or any other related problem, immediately contact a qualified
service agency. If a service agency is not available, contact your fuel
supplier.
: Personal injury or property damage could result from major repair
or service of this furnace by anyone other than a qualified contractor. The
user should only perform the routine maintenance described in the user
section of this manual.
: The area around the furnace should be kept free and clear of
combustible materials, especially papers and rags.
: Do not block or obstruct air openings on the furnace casing. Do not
block or obstruct air openings communicating within the area in which the
furnace is installed.
: Do not allow the outside air intake to be blocked or obstructed by
vegetation, ice, snow, or any other materials.
: Do not use this furnace if any part has been underwater.
Immediately call a qualified service agency to inspect the furnace and to
replace any part of the electrical or control system, which has been
underwater.
: Should overheating occur or the fuel supply fail to shut off, shut off
the manual fuel supply valve to the furnace before shutting off the electrical
supply.