Filter
Top Products
7
Master Station Video
Display Operation
To see the camera view for any of
the three attached cameras on the
Master Station:
1. Press AUX followed by the
desired video source
2. Press 5 for VID1,
3. 6 for VID2
4. 7 for VID3
The image remains on the Master Station display for 40 minutes, at
which time the display will turn off.
NOTE: This will not affect the VIDEO OUT signal.
To change the view:
• Press AUX followed by the desired video source
button.
To turn off the display:
• Press AUX followed by the active video source.
If a Video Door Station chime is activated, the Master Station Video
display is active, that door station camera will display on the Master
Station video display for 20 seconds then revert to the previously
selected view.
Video Out Control
From any room station, you can select a a video source to output to VIDEO OUT. This
video can be viewed from any TV in the house. This cannot be done from the Master
Station.
To select a source:
1. Press AUX 5 for Video Source 1
2. AUX 6 for Video Source 2
3. AUX 7 for Video Source
If a video door chime is activated, the Video out switches to the Door
camera for a preprogrammed period of time. To turn off the video
source, press AUX (active video source)
Quick Start Guide: Video