Filter
Top Products
8
Quick Start Guide: Options
NightStand Station – Audio Input
The NightStand Station can be used as a stand-alone MP3 player/
smartphone speaker.
To listen to your auxiliary audio device:
1. Plug the appropriate cable for the selected audio device fi tted with
a 3.5mm stereo plug at one end into the Audio Input Socket at the
bottom of the NightStand Station
2. Plug the other end of the cable into an MP3 player or smartphone
3. Switch Audio Source Selector at the bottom of the NightStand
Station toward the center of the Station.
4. Select Music mode on the NightStand Station by
pressing the MUS button
5. Ensure that the MP3 player or smartphone is turned
on and playing
6. With the volume of the NightStand Station set to
the normal level for communication, adjust the output volume on
the MP3 player or smartphone so the volume from the NightStand
Station is at the desired level
NOTE: With the switch positioned towards the center of the Station, the NightStand Station will not
play any music from the Master Station or any audio from Monitored Stations. All other functions
will continue to function normally.
Help Menu
The HELP MENU summarizes the 2nd function of certain
keypad buttons in conjunction with the AUX button.
1. Press and release the AUX button twice to view the
help menu
2. Press the VOLUME + and – buttons to navigate
between pages
3. Press CLEAR to exit the menu
NOTE: See P.2 of Help menu to view the second function of certain keypad buttons in conjunction with
the ‘7’ button (Applicable to Double Digit format Only)
Optional Functions
The VMC1 Security Intercom is equipped with functions that require
additional accessories. Ask you installer if these functions are enabled
at your installation.
Gate/Door Status LED
This RED LED on the Master station may be confi gured to indicate if a
door or gate is open or closed.