Filter
Top Products
3
Double Digit Operation
In Double Digit Operation,
all Stations have an I.D. from:
Press two digits for the Station to talk to. RED Status
LED blinks at all Stations to indicate the VMC1 system
is active.
NOTE: Only one conversation can be active at a time.
7. Release the button and wait for a response. Response from the
Paged Station is hands-free.
8. To answer back from the Paged Station, press 2nd
digit again.
9. To terminate the conversation, press CLEAR.
10. System times out after 20 seconds after last button
press. RED Status LED turns off.
Whole House Calling
1. To initial a whole house Page to all Stations, press
HOUSE and speak into the microphone.
2. All responses are hands free.
3. To continue the conversation press HOUSE and
speak.
4. To end the conversation, press CLEAR.
5. System times out after 20 seconds after pressing
the last button press. RED Status LED turns OFF.
Other Intercom Functions
Listen to Music or access Audio/Monitor Input:
1. Press MUS button at Master or Room Station to
enable that station speaker. RED Status LED lights
up to show it is active. Any audio input, other
Intercom conversations, are heard thru speaker.
Received Intercom Page overrides any audio for the
duration of the conversation.
2. Press MUS again to turn off
Monitor a Room Station
1. Press MON button at the Master or any Room
Station to enable that station’s speaker microphone.
GREEN Status LED lights up to indicate the room is
being monitored. All Stations where MUS is active
(RED STATUS LED lights up) can hear audio from the monitored
location(s). Multiple Stations can be monitored simultaneously.
2. Press MON again to turn off.
Quick Start Guide: Intercom
11 to 17
21 to 27
or 31 to 37