Filter
Top Products
6
2. Use the DOWN and UP buttons to adjust the desired minutes for
the alarm operation
3. Press the ALARM button again to switch to hours. The Hours will
begin to blink
4. Use the DOWN and UP buttons to adjust the desired hour for the
alarm to activate
5. Press the ALARM button again. The clock display will indicate the
alarm status; ON or OFF
6. Press DOWN or UP to toggle between ON and OFF
7. Press ALARM to exit programming
8. If the Tuner is not selected, AUX followed by INPUT
9. Activate MUS at all Stations where the Radio Alarm to be heard
When the Alarm is on, the clock will display a large “O” on the far right
of the display.
At the designated time the Master will turn on the tuner at the
designated alarm time. Only those rooms where MUS is active will the
music be heard.
If the Radio is on and the selected Alarm time is reached, the Radio
will turn off.
Radio Filter
To reduce background noise or radio interference on the radio, the
Master Station is equipped with a frequency noise fi lter to adjust or
reduce treble.
Press AUX button followed by number 4 button at Master to
activate the fi lter. The Radio Filter Led will illuminate when the fi lter is
turned on. To disable the fi lter, Press AUX followed by the 4 button
again.
NOTE: Filter only affects audio from the AM/FM radio.
Enable Aux Music
To enable the Aux music there is a 3.5mm input jack on
the Master Station as the audio source:
1. Press and release AUX
2. Press and release INPUT
Green AUX INPUT LED lights up and then Green TUNER LED will turn
off. This overrides the Radio as the source to all Stations with MUS
activated. To revert to Radio input, simply repeat steps 1 and 2 .
Quick Start Guide: Clock Radio