Filter
Top Products
Prince XL
®
- Owner's Manual - Page 12
SECTION D MAINTENANCE
PERIODIC MAINTENANCE
Maintenance of the torch will normally consist of a general cleaning of the
wire guide system, including tubes, drive rolls, and conduits at regular inter-
vals.
Remove spatter build-up from inside of nozzles with a hardwood stick.
The only parts on the Prince
®
XL that are subject to normal wear are the
conduit, contact tips, gas cups, barrel liners, drive and idler rolls. A supply of
these parts should be maintained on hand.
If repairs do become necessary, qualifi ed shop maintenance personnel can
easily replace any part.
Your Cobramatic System is designed to provide years of reliable service.
Normal wear and component failure may require occasional service.
The number of units in operation and the importance of minimal “down time”
will determine to what extent spare parts should be stocked on hand. See the
“Recommended spare parts list” for the most commonly replaced parts.
Maintenance Tools
Tool MK P/N
Gas Valve Removal Tool 931-0584
Contact Tip Removal Tool 931-0002
Drive Roll Removal Tool 931-0100