Filter
Top Products
Prince XL
®
- Owner's Manual - Page 8
3. Tighten.
4. Using a 5/32” hex wrench, turn the Idler Roll tension screw into the gear-
box housing and reference the Gearbox Assembly drawing to adjust the
pressure against the drive roll.
NOTE:
Lock washer must be under idler roll or it will not turn freely.
SECTION C ACCESSORIES
CONTACT TIPS - AIR/WATER BARREL
Contact Tips for Prince
Contact Tips for Prince
®
®
XL Air/Water Cooled Barrels
XL Air/Water Cooled Barrels
Wire Size Tip I.D. Arc Length MK P/N LE P/N
.030” (0.8mm) .040” (1.0mm)
Spray 1-5/8” (41.3mm) 621-0390 KP2217-1B1
Short 1-7/8” (47.6mm) 621-0396 --
.035” (0.9mm) .044” (1.1mm)
Spray 1-5/8” (41.3mm) 621-0391 KP2217-2B1
Short 1-7/8” (47.6mm) 621-0397 --
.045” (1.2mm) .053” (1.3mm)
Spray 1-5/8” (41.3mm) 621-0392 --
Short 1-7/8” (47.6mm) 621-0398 --
.052” (1.3mm) .060” (1.5mm)
Spray 1-5/8” (41.3mm) 621-0393* KP2217-4B1
Short 1-7/8” (47.6mm) 621-0399 --
1/16” (1.6mm) .075” (1.9mm)
Spray 1-5/8” (41.3mm) 621-0394 KP2217-5B1
Short 1-7/8” (47.6mm) 621-0400 --
1/16” (1.6mm) .085” (2.1mm) Spray 1-5/8” (41.3mm) 621-0395 --
All tips stamped with tip I.D.
*Standard - furnished with torch
FINNED COPPER GAS CUPS
AIR/WATER COOLED BARREL
Finned Copper Gas Cups for
Finned Copper Gas Cups for
Prince
Prince
®
®
XL Air/Water Cooled Torch
XL Air/Water Cooled Torch
Size I.D. MK P/N LE P/N
6 3/8” (9.5mm) 621-0248 KP2213-1
8 1/2” (12.7mm) 621-0249 KP2214-1
10 5/8” (15.8mm) 621-0250* KP2215-1
10 H.D. 5/8” (15.8mm) 621-0251 KP2216-1
12 H.D. 3/4” (19.0mm) 621-0252 --
N/A Tip Extender 621-0424 KP2244-1
*Standard - furnished with torch
TORCH BARREL LINERS
Prince
Prince
®
®
XL Torch Barrel Liners
XL Torch Barrel Liners
Description MK P/N LE P/N
Tefl on liner package, 5 pieces 931-0137 KP2226-1
Bulk tefl on liner material for .030-.063” (.8-1.6mm) 615-0178 ---
Bulk tefl on liner material for .030-.035” (.8-.9mm) 615-0177 ---
Tip Extender