Filter
Top Products
13
CARE AND MAINTENANCE
WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely.
1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
3. DO NOT immerse the heater in water.
4. Wait until the unit is completely dry before use.
5. If you will not be using the heater for a while, take the batteries out of the remote control and store
for future use.
6. Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the
original packaging to repack the unit.
REPLACING THE FLAME EFFECT BULB - Bulb Requirements: E12 (small) Socket Base (2) Max 40 watts.
1. To repalce the flame effect bulbs (2), with the heater unplugged first remove the access panel (1)
by removing the six screws holding the panel in place. Remove and replace the two light bulbs (2)
by unscrewing each bulb slowly from the socket base.
2. Reassemble and reinstall the access panel (1).
WARNING: Do not replace heater light bulbs immediately after use or during heater operation.
1 1
2