Filter
Top Products
11
OPERATING INSTRUCTIONS
1. Turn the heater on or off by pressing the
Power button on either the control panel (C)
or ON/OFF button on the remote control (B).
Once the power is off, heating elements
will stop working first. The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater. This is a
normal function.
1
C
B
2. Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the
three heat settings.
Power for heat-up mode is 1,500 W; heat-
down is 1000 W. ECO mode is an Economic
Energy Saving Function. When ECO mode is
chosen, the heater will operate to maintain a
constant warm 68°F.
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC.
2
HIGH LOWECO
C
B
H / L / E
3. Set the thermostat by pressing the arrows on
the control panel (C) or the remote control (B).
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C. Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to
the temperature on the digital display. The
heater will cycle on and off to maintain the
desired room temperature.
Press the °C/°F button on the control panel
(C) to switch the digital display indicator on
the heater between Fahrenheit and Celsius.
3
C
B
C
OR
TEMP UP
TEMP.
UP
TEMP.
DOWN
TEMP DOWN