Filter
Top Products
8 AHU CONTROL KIT
Basic operation of wired remote controller
Press the Run/Stop button on the control
part of the remote controller to start the
operation.
1
Press the Operation Selection button to
set the operating mode (Heating/Cooling
etc.).
2
Press the Temperature Control button to
set the desired temperature below the
indoor temperature. (Based on air
conditioning operation)
3
When you press the Run/Stop button
during use, the operation will stop.
4
(Example) Remote controller
display window
▲ Indoor
temperature
▲ Desired
temperature
During the initial operation, the
desired temperature is
automatically set below the indoor
temperature.
Basic operation of wired remote controller