Filter
Top Products
Owner's Manual 27
ENGLISH
Setting function of wired remote controller installation
5
Press the Up/Down button to select the
damper opening.
The damper opening that can be set is
in the range of 1~91
degrees.
6
Press the OK/CLEAR button to complete
the setting.
7
C
Press the Right button to move to
‘Setting of 2’ by each mode.
Air conditioning
external damper
opening of 40°
Heating external
damper opening
of 40°
Fan external
damper opening
of 40°
Display C: Installation setting display
Function
Code
Setting1
Setting2
Flashes
* This is the function to set the damper opening
of AHU.
* This applies only to the site where the damper
actuator is installed.