Filter
Top Products
28 AHU CONTROL KIT
Setting function of wired remote controller installation
1
Press the Function Setting button
repeatedly to reach function code of ‘13’.
2
Press the Right button to move to
‘Setting of 1’.
3
Press the Up/Down button to set the value.
Setting value of ‘01’ is
the Master and ‘00’
is the Slave.
4
Press the OK/CLEAR button to
complete the setting.
5
C
Enter the Installation Setting mode.
Display C: Installation setting display
Function
Code
Setting1 Setting2
Flashes
Flashes
Master
Slave
Remote control Master/Slave setting
* This is the function to set the mainly
used remote controller.
* You can set one remote controller as
the Master and the rest as Slave.