Filter
Top Products
26 AHU CONTROL KIT
Setting function of wired remote controller installation
1
Repeatedly press the Function Setting
button to reach function code of ‘12’.
2
Press the Right button
to move to ‘Setting of 1’.
3
Press the Up/Down button to set the value.
‘Setting of 1’ for each mode is as follows.
* Cooling mode [ ‘01’ (OA) /‘02’ (EA) / ‘03’
(Mixing)]
* Heating mode [ ‘04’ (OA) /
‘05’ (EA) / ‘06’ (Mixing)]
* Fan mode [ ‘07’ (OA) /
‘08’ (EA) / ‘09’ (Mixing)]
4
C
Enter the Installation Setting mode.
Cooling
OA damper
Heating OA
damper
Fan OA damper
Display C: Installation setting display
Function
Code
Setting1
Setting2
Flashes
Flashes
Damper opening setting