Filter
Top Products
Setting function of wired remote controller installation
Owner's Manual 25
ENGLISH
Central control address setting
1
Press the Function Setting button
repeatedly to reach function
code of ‘11’.
2
Press the Right button to
move to ‘Setting of 1’.
3
Press the Up/Down button
to set the central control
address.
4
Press the Set/Cancel button
to complete the central
control address setting.
5
Enter the Installation Setting mode.
Flashes
Flashes
Central
control
address
Display C: Installation setting display
Function
Code
Setting1 Setting2
* This is the function to set the central control
address of AHU.