Filter
Top Products
—26—
3.2.3 UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door.
(See Figure 20)
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(See Figure 21)
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (See Figure 22)
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (See Figure 23)
Figure 20
Figure 21
Figure 22
Figure 23