CLEARANCE TO COMBUSTIBLES
The following clearances meet the minimum requirements for a safe
installation;
Side wall: 17”(324mm)measuredfromthereplaceside
Ceiling: 6’8”(2,032mm)measuredfromthebaseofthereplace
Fireplace enclosure:
Bottom:0”
Side:0”tospacer
Back:0”tospacer
Top: Do not fill the space above the fireplace with any material
(Except the wood framing. See Page 9, Figure 8)
Chimney: 2”(50mm)
Mantel: 42”(1067mm)measuredfromthebaseofthereplace.
Montecito™ Replacement Parts
Description Part/Cat. No.
Blower(heatactivatedon/offpre-wired),UZY5 UZY5
Blowermotorspeedcontrol(wallmount),VRUW VRUW
Snap Disc, Blower VTU
Baffle refractory (2 pieces) PR-ISO2205
Back refractory PR-SR2618
Right side refractory PR-SR2619D
Left side refractory PR-SR2619G
Bottom refractory PR-SR2201
Front refractory, right side PR-SR2202D
Front refractory, left side PR-SR2202G
Door handle PR-SR1787
Hinge Assembly, Fireplace and Door PR-SR2395TCE
Decorative Screw Caps, Black (2) PR-SACMEFBK
Decorative Screw Caps, Brushed Nickel (2) PR-SACMEFBN
Ceramic glass panel PR-SR2222-1
Secondary air tube PR-SR2271
Cast-iron Log Retainer Supports - Grate (2) PR-SR2324
CastIronLogRetainerBar(w/LennoxLogo) PR-SR2323
Gasket Kit, Glass, 69”(1x5/16”)(steelandcastdoors) PR-SR1823H
Gasket Kit, Steel Door Frame, 73”(5/8”dia.) PR-SR1685D
Gasket Kit, Cast Door Frame, 73”(5/8”dia.) PR-SR1823G
Touch-up Paint, Aerosol, Black Metallic SBMB6309 70K99
Touch-up Paint, Charcoal (for hammered steel facade) PR-P6201
Coupler,OutsideAir(connectsUZItoreplace) UZIAD
Coupler for AC Chimney (connects ACZI to fireplace) H3274
SPECIFICATIONSREPLACEMENT PARTS LIST
Cat. No. Model
H4841 Montecito
Product Reference Information
Weight 300 lbs
Height 36”
Width 36”
Depth 24-1/2”
Firebox W x H x D - measured in front 22”x11-3/4”x12”
ChimneyWeightASHT(6”dia) 6.25lb/ft.
ChimneyWeightAC(6”dia.) 3.25lb/ft.
ChimneyweightS-2100+(6”dia.) 10.8lb/ft.
Contact an Authorized Lennox Hearth Products dealer to obtain any of
these parts. Never use substitute materials not approved by Lennox
Hearth Products. Use of non-approved parts can result in poor perfor-
mance and safety hazards.
23