Filter
Top Products
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
2
INSTALLATION INSTRUCTIONS
Locate the fireplace as per the instructions supplied under the fireplace. Make the following modifications to add the components used with the
Power Vent Kits. This kit can only be used in conjunction with “Direct Vent” series electronic versions of Lennox Fireplaces. This installation must
conform with local codes or, in the absence of local codes, with the Natural Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane
Installation Code, CSA B149.1.
CAUTION: The LPVK-110 Power Vent Kit cannot be used with Millivolt appliances. Use the LPVK-110 only with the Electronically con-
trolled fireplaces listed for its use as shown in this document.
Power Vent Kit Components
POWER VENT KIT CONTENTS
Item
No.
Part
Number
Description Qty.
1 601970-01
Vacuum Hose 1
2 102019-01 Wiring Harness 1
3 102005-01 Pressure Switch 1
4 102009-01 Control Module 1
5 102010-01 Strain Relief - 3/8” 2
6 102021-01 Ring Terminal - #10 2
7 H7384 Insulated 1/4” Male Terminal 4
Item
No.
Part
Number
Description Qty.
8 102022-01
Hose Clamp - 11/32” 2
9 P-8-7102 Snap Bushing 2
10 601957-01 Power Vent Termination 1
11 601978-01 Probe Assembly 1
12 74L61 SV Termination Adapter (SV4.5RCH) 1
13 H2246 Firestop Assembly (Horizontal) 1
14 67L6501 Velcro Strips (2” Lengths) 3
3
1
12
4
10
9
11
8
2
7
14
13
6
5