Filter
Top Products
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
12
POWER VENT OPERATING INSTRUCTIONS
Power Vent Control Sequences
Turn On
1. Turn On The Thermostat Or On/Off Switch.
2. Blower Should Start Immediately.
3. Ignitor Starts Sparking And Pilot Will Light.
4. Burner Should Light After A Few Seconds.
5. Fireplace Should Run Continuously Until Thermostat Or On/Off Switch Is Turned Off.
Turn Off
1. Turn Off The Thermostat Or On/Off Switch.
2. Burner And Pilot Should Be Off Immediately.
3. Blower Will Continue To Run For About 90 Seconds And Then The Blower Will Stop.
16.17
(411 mm)
15.92
(404 mm)
10.00
(254 mm)
11.19
(284 mm)
13.50
(343 mm)
Top View
Front View
POWER VENT SPECIFICATIONS
Note: Dimensions Are In Inches (mm)