Filter
Top Products
5
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Corner Installations Continued
Vertical Venting
Parallel Installations
Vertical Venting
Alcove Installations
Minimum alcove height is 41” (1041mm), minimum width is
42-1/4” (1073mm), and maximum depth is 48” (1219mm).
Note, it is quite difficult to load pellets into the hopper when
installed in an alcove only 41” (1041mm) high. For alcove
wall clearances see parallel clearances below.
INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENT
MANUFACTURER.
Horizontal Venting
5-7/8”
(149mm)
5-7/8”
(149mm)
17-1/4”
(423mm)
3” (76mm)
9”
(229mm)
8”
(203mm)
8”
(203mm)
3” (76mm)
42-1/4”
(1073mm)
41”
(1041mm)
48”
(1219mm)
Top Vent
Figure 5
Figure 6
Figure 7
Figure 8